• Installs in 5 minutes or less
• Reusable, lasts for >10 years
• Waterproof to 20ft (6 m)
• Industrial cable, custom lengths
• Standard millivolt output
• N.I.S.T traceable calibration
The ST350 Strain Transducer has been designed to quickly and accurately measure strain on a variety of structures in harsh field environments. This 350Ω full Wheatstone bridge strain transducer is very accurate, rugged, and waterproof.
The ST350 is a strain transducer used to evaluate live-load stresses on structures such as bridges, buildings, cranes, and amusement park rides. It is prewired to connect directly with data loggers, and is ideal for structural monitoring data acquisition systems.
Providing roughly 3.5 times the output of a typical foil strain gage, these reusable sensors are ideal for measuring live-load strain on structures and can be installed within minutes in all weather conditions. Over 30 years of experience have proven these units to be the gold standard for accurate field measurements.
|CIRCUIT||Full Wheatstone bridge with 4 active 350Ω strain gages|
|EXCITATION VOLTAGE||+1.0 to +10.0 Vdc|
|OUTPUT||mV level, ratiometric to Excitation Voltage|
|STRAIN RANGE||±4,000 µε (Calibrated to ±2,000 µε)|
|TYPICAL SENSITIVITY||~500 με/mVout/Vin|
|EFFECTIVE GAGE LENGTH||3.0 in (76.2 mm) [Gage Extensions available for R/C structures]|
|HOUSING||Machined 6061 Aluminum Alloy|
|CORROSION PROTECTION||Hard Anodized Clear (MIL-A-8625 Type III)|
|WEATHER PROTECTION||Designed to exceed IP67
Optional 100 ft (30 m), waterproofing available
|TEMPERATURE RATING2||-58° to +176 °F (-50° to +80 °C)|