Model:IHH500 Pro • Futek FSH03571 • 24 bits internal resolution • Up to 20 bits (±500,000 counts) noise free resolution • 5 to 4800 sample per second selectable rate • High accuracy (±0.001%) • Low non-linearity (±0.001%) • Input range up to ±500mV/V (Strain Gauge) • Input range ±12VDC (Amplified Input) • Input range up to 30 mA (Amplified Input) • Minimum bridge resistance: 30 ohm • Encoder TTL (Elite Version) • USB Output • ASCII stream output • CE approval and RoHS compliant • Precision 5.000V Excitation • 24V/5V Output • Analog Voltage and Current Output
Model:IHH500 Elite • Futek FSH03460 • 24 bits internal resolution • Up to 20 bits (±500,000 counts) noise free resolution • 5 to 4800 sample per second selectable rate • High accuracy (±0.001%) • Low non-linearity (±0.001%) • Input range up to ±500mV/V (Strain Gauge) • Input range ±12VDC (Amplified Input) • Input range up to 30 mA (Amplified Input) • Minimum bridge resistance: 30 ohm • Encoder TTL (Elite Version) • USB Output • ASCII stream output • CE approval and RoHS compliant • Precision 5.000V Excitation • 24V/5V Output • Analog Voltage and Current Output
Model:PSD • Mantracourt PSD • Handheld 7 digit LCD display with peak, trough, net, overload and shunt cal indication • Battery life of 450 hours in power save mode • Keys for on/off, range select, peak/valley hold, and gross/net • Single pass calibration (direct mV/V) with dual range for values such as kg and lb • Easy to carry - weighing only 250 grams • Waterproof IP65 NEMA4 battery powered • Microprocessor based, allowing single pass calibration facility (direct mV/V) • TEDS enabled for automatic sensor calibration (IEEE1451 - template 33)
Model:GM77 • Lorenz-messtechnik GM77 • Display and Decimal Point Freely Scalable • Mains-, Battery-, Accu Operation • Cut-Off after 15 min • Calibration Control Switch • Maximum Value Memory • Signal Conversion Switch • Integrated Accu Charger • 41⁄2-digit LCD-Display • Easiest Calibration
Model:P3 • Vishay P3 Strain Indicator and Recorder • Four input channels • Direct reading LCD display • On-board data storage • 0 to 2.5Vdc analog output • Quarter, half and full bridge circuits • Built-in bridge completion • 120-, 350- and 1000-ohm dummy gages • Automatic zero-balancing and calibration • Intuitive, menu-driven operations • USB data link • Operation from keypad or PC • Portable, lightweight and rugged • Battery, USB or line-voltage power • Optional 10-pin transducer connectors
